Performance Capacity Testing Of Hush Peeling And Soybean Seed Crusing Machine For Home Industry Scale
Keywords:
soybean peeler, function test, performance test, waste, net weightAbstract
The process of peeling and splitting soybeans is a process carried out by industry which uses soybeans to clean the skin and at the same time peeling them using a machine that peels the epidermis and also splits the soybeans can speed up the cleaning process. The machine for peeling epidermis and splitting soy beans uses a pulper as the part that peels and splits at the same time in one machine rotation. This model of machine for peeling epidermis and splitting soy beans is intended for home industries with a processing capacity of 10 kg/hour. The performance capacity test was carried out to test the ability to peel and split soybeans using a tube pulper with soybeans that had been soaked in water for 10 hours previously. Based on the tests carried out, it was found that the peeling and splitting capability of the machine for peeling the epidermis and splitting the soybean seeds was produced based on the initial weight before peeling, the soybeans that were completely peeled were 88.2% and the weight of the waste was 11.8%, peeled in imperfect conditions. broken and not peeled based on the influence of the gap in the peeling space of 2mm.
References
Agus Kusnayat, Erna Febriyanti, Mohammad Yasin Abdul Hafidh, Shinta Yulia, Anisa Herdiani, Indra Lukmana Sardi, Sri Martini, Agus Kusnayat, Erna Febriyanti, Mohammad Yasin Abdul Hafidh, Shinta Yulia, Anisa Herdiani, Indra Lukmana Sardi, S. M. (2019). ARI KACANG KEDELAI UNTUK MENINGKATKAN KAPASITAS PRODUKSI TEMPE CV . MITRA PANGAN. Charity Jurnal Pengabdian Masyarakat Vol.02 No.01 (2019), 02(01), 1–9.
Purwantana, B., & Bintoro, N. (2012). PENERAPAN ANALISIS DIMENSI DALAM RANCANG BANGUN MESIN PEMBELAH BIJI KEDELAI ( Glycine max L .) SISTEM GESEK PUTAR Application of Dimensional Analysis In The Design of Spin Friction Type of Soybean Slicing Machine. 32(2), 161–166.
Ramadani, A. H., Ketintang, J., & Ridlwan, A. A. (2022). MESIN PENGUPAS KULIT ARI KEDELAI OTOMATIS UNTUK MENINGKATKAN PRODUKTIVITAS INDUSTRI KECIL TEMPE DI TULUNGAGUNG. 3(1), 29–39.
Setiawan, S. B. (2012). Model Efisiensi Mesin Pengupas dan Pembelah Biji Kedelai Tipe Piringan Menggunakan Program Powersim. Positron, 2(2), 25–32. https://doi.org/10.26418/positron.v2i2.3635
Suknia, S. L., & Rahmani, T. P. D. (2020). Proses Pembuatan Tempe Home Industry Berbahan Dasar Kedelai (Glycine max (L.) Merr) dan Kacang Merah (Phaseolus vulgaris L.) Di Candiwesi, Salatiga. Southeast Asian Journal of Islamic Education, 03(01), 59–76.
Yokki, Sinuraya, O. S. (2021). RANCANG BANGUN MESIN PENGUPAS KULIT ARI KACANG KEDELAI KAPASITAS 40 KG/JAM. JURNAL TEKNOLOGI MESIN UDA, 2(1), 67–72.