DEVELOPMENT OF ECO-FRIENDLY LUBRICATING GREASE FROM PALM KERNEL OIL WITH POLYPROPYLENE ADDITIVE: A SUSTAINABLE APPROACH
DOI:
https://doi.org/10.58471/ju-komi.v4i01.748Keywords:
Grease, Sustainable, Development ,Eco-Friendly ,LubricatingAbstract
This study explores the development of eco-friendly lubricating grease from palm kernel oil with polypropylene additive, adopting a sustainable approach. The research focuses on formulating high-performance greases suitable for industrial and automotive applications. Through experimental synthesis and testing, including worked penetration, dropping point, and water washout resistance, the study evaluates the grease's properties. Results show that the formulated grease with polymer additive exhibits improved thermal stability (dropping point of 187°C) and suitable consistency (worked penetration of 250), meeting NLGI Grade 2 and 3 standards (Table 4.3). The grease also demonstrates excellent water resistance and anti-wear characteristics. This research contributes to sustainable lubrication science, offering a viable alternative to conventional greases and supporting environmentally friendly practices in various industries..
References
Åström, H., & Hoglund, E. (1990). Rheological properties of six greases and their two base oils. Technical Report. Lulea University of Technology, Sweden.
ASTM International. (2013). D4950-13 Standard Classification and Specification for Automotive Service Greases.
Beach, W. J. (1959). Industrial Fatty Acids. In E. S. Pattison (Ed.), Fatty Acids (Vol. 12, Part 1, pp. 158-163). Reinhold.
Behling, R. D., & Lubrizol Corporation. (1996). Ready Reference for Lubricant and Fuel Performance - Lubricating Oils
Boner, C. J. (1976). Modern Lubricating Greases. Scientific Publications (G.B) Ltd.
Cheng, D. C. H. (1989). The art of coarse rheology. The British Society of Rheology Bulletin, 32(1), 1-21.
Cowan, S. (2007). Machinery Lubrication.
Dorinson, A., & Ludema, K. C. (1985). Mechanics and Chemistry in Lubrication. Elsevier Science Publications.
Erlich, M. (1984). NLGI Lubricating Grease Guide. National Lubricating Grease Institute.
George, E. T., Steven, R. W., & Rajesh, J. S. (2003). NLGI/ASTM Standards for Lubricating Greases.
Frand, E. (1988). Product and Marketing Development in mature industries. Paper presented at the 55th Annual meeting of the NLGI, Wesley Chapel, Florida, U.S.A.
George, D. H. (2004). Modern Petroleum Technology (4th ed.). John Wiley and Sons.
Boner, C. J. (1976). Modern Lubricating Greases. Scientific Publications (G.B) Ltd.
Cheng, D. C. H. (1989). The art of coarse rheology. The British Society of Rheology Bulletin, 32(1), 1-21.
Dorinson, A., & Ludema, K. C. (1985). Mechanics and Chemistry in Lubrication. Elsevier Science Publications.
George, E. T., Steven, R. W., & Rajesh, J. S. (2003). NLGI/ASTM Standards for Lubricating Greases.
Gow, G. M. (1990). The CEY to Grease Rheology. AB Axel Christenson, Sweden.
Hoglund, E. (1989). The relationship between lubricant shear strength and chemical composition of the base oil. Wear 130, 213-224.
ISO. (2016). ISO 6743-9: Classification of lubricants-Part 9: Greases. International Organization for Standardization.
